Earthing Bentonite
Improvement of Electrical Grounding System Using Bentonite
Good water holding capacity,
Absorbs up to five times its weight in water,
Negative impact on the environment.
Earthing Grade Bentonite
Earthing is used for safety and protection purpose from lightning. Due to surge or lightning strike high voltage impulse transmitted into earth through air & any of the other equipment connected to earth like building, human, tower poles etc.
Our product EGB Plus will improve the value of Rg because bentonite has various good properties including very low and stable resistivity; abilities to absorb and retain large quantities of water. Bentonite clay used to lower the resistance to earth by providing ground enhancement effectively reducing the resistance between the soil and earth electrode (such as copper earth rod or earth mats) by retaining moisture.
This is special type of earthing material added to earth pit that helps in improving the condition of the soil and reducing the soil resistivity.
Benefits Of Our Product
How is earthing done
To ensure safety, earthing can be done by connecting the electrical appliance to earthing system or electrodes placed near the soil or below the ground level.
The electrode or earthing mat equipped with a flat iron riser is installed under the ground level. It helps to connect all the non-current carrying metallic parts of the equipment.
As for earthing transfer the charge to the earth, so it prevents the appliances from electrical damages. Hence, earthing is required for avoiding damages. Whenever a high current flow through the circuits, it transfers that overcurrent to the earth which is not useful and prevent the circuit from catching fire and damaging the appliances. And it completes the circuit to operate the appliances in normal conditions. And there is a proper way for earthing and if it doesn’t do properly then it may cause unusual activities.